Will “Radar Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Radar Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Radar Technician”
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
Related Technology & Tools
- Flow meters
- Brazing equipment
- X ray inspection equipment
- Pin punches
- Drill presses
- Drive punches
- Bore gauges
- Aligning punches
- Socket wrenches
- Vibration tables
- Thermocouples
- Twist drills
- Scribers
- Planer gauges
- Voltmeters
- Split dies
- Snap gauges
- Mill files
- Accelerometer sensors
- Telescopes
- Gamma ray testing equipment
- Straightedges
- Small hole gauges
- Computerized numerical control CNC lathes
- Depth gauges
- Gyroscopes
- Gas arc welding equipment
- Computer numerical controlled CNC milling machines
- Scaffolding
- Purifying respirators
- Spring calipers
- Impact hammers
- Vibration transducers
- Thickness gauges
- Fire extinguishers
- Digital calipers
- Bubble emission inspection equipment
- Infrared inspection equipment
- Flat files
- Adjustable wrenches
- Terminal computers
- Gantry mills
- Gauge blocks
- Bleeder wrenches
- Pressure gauges
- Vertical turret lathes VTL
- Theodolites
- Strain gauge balances
- Multi-axis mills
- Wire crimpers
- Vernier calipers
- Mass spectrometers
- Open end wrenches
- Half-round files
- Annealing ovens
- Go/no-go gauges
- Force transducers
- Riveting tools
- Power screwdrivers
- Hydrasets
- Skin mills
- Combination wrenches
- Aviation snips
- Shielded arc welding tools
- Telescoping gauges
- Straight chisels
- Accelerometers
- Vixen files
- Allen wrenches
- Personal computers
- Fluorescent penetrant inspection equipment
- Electronic torque testers
- Air-supplying respirators
- Mallets
- Paint booths
- Prick punches
- Precision files
- Soft face hammers
- Offset screwdrivers
- Hacksaws
- Body harnesses
- Ball peen hammers
- Plug gauges
- Dye penetrant inspection equipment
- Overhead cranes
- Countersinks
- Flat head screwdrivers
- Digital height gauges
- Steel rules
- Depth micrometers
- Thread gauges
- Torx drivers
- Welding torches
- Dividers
- Safety goggles
- Bench vises
- Knife files
- Vibration testers
- Hand snips
- Shot peening equipment
- Tri-squares
- Round files
- Forklifts
- Torque wrenches
- Borescopes
- Hook spanner wrenches
- Micrometers
- Safety lanyards
- Layout compasses
- Magnetic particle inspection equipment
- Eddy current inspection equipment
- Soldering irons
- Bottoming taps
- Safety wire pliers
- Plug taps
- Box end wrenches
- Coordinate measuring machines CMM
- Reed and Prince screwdrivers
- Taper taps
- Brazing hearths
- Shakers
- Alignment squares
- Digital torque wrenches
- Dial calipers
- Protractors
- Ultrasonic inspection equipment
- V blocks
- Center punches
- Lasers
- Air drills
- Pyrotechnic initiators
- Digital force gauges
- Data acquisition software
- Microsoft Excel
- Oracle Java
- Microsoft PowerPoint
- Vibration analysis software
- Microsoft Visio
- Inventory software
- Microsoft Office
- Computer aided design CAD software
- Microsoft SQL Server
- Microsoft Word
- Extensible markup language XML
- Structured query language SQL
- UNIX
- Computerized numerical control CNC software