Will “Engineering Operations Leader” be Replaced By Robots? 🤔
48% Chance of Automation
“Engineering Operations Leader” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Engineering Operations Leader”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Adjust, repair or replace faulty components of test setups and equipment.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
Related Technology & Tools
- Protractors
- Body harnesses
- Gauge blocks
- Prick punches
- Aligning punches
- Fire extinguishers
- Soldering irons
- Scribers
- Accelerometer sensors
- Accelerometers
- Alignment squares
- Small hole gauges
- Welding torches
- Hook spanner wrenches
- Pyrotechnic initiators
- Flat files
- Hand snips
- Soft face hammers
- Reed and Prince screwdrivers
- Air drills
- Flow meters
- Vibration testers
- Vertical turret lathes VTL
- Multi-axis mills
- Taper taps
- Spring calipers
- Paint booths
- Precision files
- Electronic torque testers
- Borescopes
- Pin punches
- Brazing equipment
- Planer gauges
- Forklifts
- Thickness gauges
- Aviation snips
- Drill presses
- Gantry mills
- Bench vises
- Center punches
- Brazing hearths
- Coordinate measuring machines CMM
- Round files
- Torx drivers
- Force transducers
- Socket wrenches
- Telescopes
- Ultrasonic inspection equipment
- Offset screwdrivers
- Adjustable wrenches
- Steel rules
- Safety wire pliers
- Terminal computers
- Countersinks
- Straightedges
- Eddy current inspection equipment
- Infrared inspection equipment
- Dye penetrant inspection equipment
- Dividers
- Gas arc welding equipment
- Vixen files
- X ray inspection equipment
- Impact hammers
- Strain gauge balances
- Digital height gauges
- Box end wrenches
- Magnetic particle inspection equipment
- Gyroscopes
- Telescoping gauges
- Air-supplying respirators
- Skin mills
- Bubble emission inspection equipment
- Vibration transducers
- Hacksaws
- Depth gauges
- Riveting tools
- Thermocouples
- Ball peen hammers
- Mill files
- Pressure gauges
- Scaffolding
- Bleeder wrenches
- Flat head screwdrivers
- Dial calipers
- Digital force gauges
- Personal computers
- V blocks
- Tri-squares
- Plug gauges
- Thread gauges
- Bore gauges
- Knife files
- Mass spectrometers
- Safety goggles
- Annealing ovens
- Shakers
- Computer numerical controlled CNC milling machines
- Overhead cranes
- Fluorescent penetrant inspection equipment
- Safety lanyards
- Twist drills
- Layout compasses
- Plug taps
- Theodolites
- Straight chisels
- Snap gauges
- Lasers
- Power screwdrivers
- Depth micrometers
- Shot peening equipment
- Half-round files
- Wire crimpers
- Split dies
- Voltmeters
- Torque wrenches
- Allen wrenches
- Vernier calipers
- Open end wrenches
- Computerized numerical control CNC lathes
- Digital torque wrenches
- Drive punches
- Gamma ray testing equipment
- Micrometers
- Vibration tables
- Mallets
- Go/no-go gauges
- Hydrasets
- Purifying respirators
- Bottoming taps
- Digital calipers
- Shielded arc welding tools
- Combination wrenches
- Microsoft SQL Server
- Extensible markup language XML
- Inventory software
- Microsoft PowerPoint
- Structured query language SQL
- Microsoft Word
- UNIX
- Oracle Java
- Microsoft Office
- Microsoft Visio
- Computerized numerical control CNC software
- Computer aided design CAD software
- Data acquisition software
- Vibration analysis software
- Microsoft Excel