Will “Altitude Chamber Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Altitude Chamber Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Altitude Chamber Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Finish vehicle instrumentation and deinstrumentation.
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
Related Technology & Tools
- Mallets
- Plug taps
- Aviation snips
- Multi-axis mills
- Open end wrenches
- Theodolites
- Fluorescent penetrant inspection equipment
- Flat files
- Hacksaws
- Tri-squares
- Shielded arc welding tools
- Annealing ovens
- Gamma ray testing equipment
- Infrared inspection equipment
- Computerized numerical control CNC lathes
- Overhead cranes
- Mass spectrometers
- Twist drills
- Round files
- Vibration testers
- Taper taps
- Safety wire pliers
- Flat head screwdrivers
- Body harnesses
- Hydrasets
- Computer numerical controlled CNC milling machines
- Accelerometer sensors
- Flow meters
- Digital force gauges
- V blocks
- Adjustable wrenches
- Shot peening equipment
- Coordinate measuring machines CMM
- Force transducers
- Vibration transducers
- Alignment squares
- Center punches
- Lasers
- Torque wrenches
- Mill files
- Impact hammers
- Dial calipers
- Protractors
- Personal computers
- Forklifts
- Micrometers
- Welding torches
- Digital height gauges
- Fire extinguishers
- Bubble emission inspection equipment
- Layout compasses
- Drive punches
- Go/no-go gauges
- Reed and Prince screwdrivers
- Bottoming taps
- Terminal computers
- Gyroscopes
- Power screwdrivers
- Purifying respirators
- Brazing equipment
- Paint booths
- Shakers
- Snap gauges
- Brazing hearths
- Precision files
- Vertical turret lathes VTL
- Air drills
- Spring calipers
- Voltmeters
- Box end wrenches
- Telescoping gauges
- X ray inspection equipment
- Electronic torque testers
- Drill presses
- Safety goggles
- Depth gauges
- Gas arc welding equipment
- Scaffolding
- Ultrasonic inspection equipment
- Air-supplying respirators
- Straightedges
- Planer gauges
- Vibration tables
- Dye penetrant inspection equipment
- Straight chisels
- Pressure gauges
- Bore gauges
- Dividers
- Small hole gauges
- Gauge blocks
- Allen wrenches
- Safety lanyards
- Borescopes
- Split dies
- Thread gauges
- Bleeder wrenches
- Thickness gauges
- Soft face hammers
- Half-round files
- Pin punches
- Vernier calipers
- Socket wrenches
- Hand snips
- Soldering irons
- Accelerometers
- Depth micrometers
- Torx drivers
- Eddy current inspection equipment
- Ball peen hammers
- Hook spanner wrenches
- Prick punches
- Bench vises
- Riveting tools
- Steel rules
- Combination wrenches
- Aligning punches
- Countersinks
- Digital calipers
- Vixen files
- Scribers
- Skin mills
- Digital torque wrenches
- Offset screwdrivers
- Pyrotechnic initiators
- Plug gauges
- Gantry mills
- Magnetic particle inspection equipment
- Telescopes
- Wire crimpers
- Knife files
- Strain gauge balances
- Thermocouples
- Inventory software
- Microsoft PowerPoint
- UNIX
- Microsoft Visio
- Computerized numerical control CNC software
- Microsoft Office
- Structured query language SQL
- Data acquisition software
- Extensible markup language XML
- Oracle Java
- Microsoft Excel
- Computer aided design CAD software
- Microsoft SQL Server
- Vibration analysis software
- Microsoft Word