Will “Avionics Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Avionics Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Avionics Technician
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Avionics Technician”
- Record and interpret test data on parts, assemblies, and mechanisms.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Adjust, repair or replace faulty components of test setups and equipment.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Exchange cooling system components in various vehicles.
- Finish vehicle instrumentation and deinstrumentation.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
Related Technology & Tools
- Aviation snips
- Open end wrenches
- Torque wrenches
- Overhead cranes
- Layout compasses
- Countersinks
- Annealing ovens
- Bleeder wrenches
- Accelerometer sensors
- Riveting tools
- Power screwdrivers
- Steel rules
- Drive punches
- Combination wrenches
- Pyrotechnic initiators
- Flat head screwdrivers
- Shot peening equipment
- Hacksaws
- V blocks
- Plug taps
- Computerized numerical control CNC lathes
- Small hole gauges
- Strain gauge balances
- Digital calipers
- X ray inspection equipment
- Vernier calipers
- Offset screwdrivers
- Welding torches
- Forklifts
- Vibration testers
- Theodolites
- Telescopes
- Fire extinguishers
- Gyroscopes
- Go/no-go gauges
- Shakers
- Digital force gauges
- Drill presses
- Hook spanner wrenches
- Vibration transducers
- Bore gauges
- Eddy current inspection equipment
- Mallets
- Depth micrometers
- Alignment squares
- Paint booths
- Safety goggles
- Aligning punches
- Hydrasets
- Shielded arc welding tools
- Tri-squares
- Gantry mills
- Straight chisels
- Dial calipers
- Safety lanyards
- Telescoping gauges
- Thread gauges
- Planer gauges
- Twist drills
- Terminal computers
- Infrared inspection equipment
- Brazing hearths
- Half-round files
- Soldering irons
- Dividers
- Box end wrenches
- Allen wrenches
- Air drills
- Center punches
- Mill files
- Dye penetrant inspection equipment
- Electronic torque testers
- Spring calipers
- Split dies
- Borescopes
- Personal computers
- Impact hammers
- Safety wire pliers
- Body harnesses
- Force transducers
- Soft face hammers
- Flat files
- Scaffolding
- Vibration tables
- Magnetic particle inspection equipment
- Adjustable wrenches
- Hand snips
- Gamma ray testing equipment
- Straightedges
- Depth gauges
- Torx drivers
- Flow meters
- Air-supplying respirators
- Prick punches
- Micrometers
- Ultrasonic inspection equipment
- Coordinate measuring machines CMM
- Socket wrenches
- Scribers
- Mass spectrometers
- Reed and Prince screwdrivers
- Knife files
- Bubble emission inspection equipment
- Brazing equipment
- Computer numerical controlled CNC milling machines
- Skin mills
- Digital height gauges
- Multi-axis mills
- Lasers
- Gas arc welding equipment
- Protractors
- Plug gauges
- Bench vises
- Vertical turret lathes VTL
- Pin punches
- Precision files
- Bottoming taps
- Taper taps
- Ball peen hammers
- Wire crimpers
- Voltmeters
- Gauge blocks
- Thermocouples
- Accelerometers
- Digital torque wrenches
- Vixen files
- Purifying respirators
- Snap gauges
- Round files
- Pressure gauges
- Fluorescent penetrant inspection equipment
- Thickness gauges
- Vibration analysis software
- Structured query language SQL
- Computerized numerical control CNC software
- Microsoft Word
- Oracle Java
- Data acquisition software
- UNIX
- Microsoft Office
- Microsoft PowerPoint
- Extensible markup language XML
- Microsoft Visio
- Microsoft Excel
- Inventory software
- Computer aided design CAD software
- Microsoft SQL Server