Will “Aerospace Mechanic” be Replaced By Robots? 🤔
48% Chance of Automation
“Aerospace Mechanic” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerographer
Tasks for “Aerospace Mechanic”
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Exchange cooling system components in various vehicles.
- Finish vehicle instrumentation and deinstrumentation.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
Related Technology & Tools
- Magnetic particle inspection equipment
- Gauge blocks
- Annealing ovens
- Bubble emission inspection equipment
- Torque wrenches
- Lasers
- Snap gauges
- Vernier calipers
- Fire extinguishers
- Brazing hearths
- Box end wrenches
- Mill files
- Steel rules
- Force transducers
- Pin punches
- Hook spanner wrenches
- Eddy current inspection equipment
- Borescopes
- Aligning punches
- Protractors
- Fluorescent penetrant inspection equipment
- Flow meters
- Personal computers
- Straightedges
- Mass spectrometers
- Scribers
- Offset screwdrivers
- Tri-squares
- Vibration tables
- Electronic torque testers
- Round files
- Drive punches
- Riveting tools
- Half-round files
- Theodolites
- Digital calipers
- Drill presses
- Bore gauges
- Spring calipers
- Vixen files
- Shakers
- Micrometers
- Countersinks
- Vertical turret lathes VTL
- Body harnesses
- Multi-axis mills
- Voltmeters
- Impact hammers
- Safety wire pliers
- Knife files
- Gantry mills
- Pyrotechnic initiators
- Ball peen hammers
- Torx drivers
- Power screwdrivers
- Terminal computers
- Digital force gauges
- Infrared inspection equipment
- Ultrasonic inspection equipment
- Gas arc welding equipment
- Shot peening equipment
- Dividers
- Flat head screwdrivers
- Precision files
- Socket wrenches
- Skin mills
- V blocks
- Gyroscopes
- Telescoping gauges
- Computer numerical controlled CNC milling machines
- Open end wrenches
- Pressure gauges
- Hydrasets
- Gamma ray testing equipment
- Bottoming taps
- Vibration testers
- Wire crimpers
- Thread gauges
- Purifying respirators
- Safety goggles
- Shielded arc welding tools
- Split dies
- Flat files
- Bench vises
- Soft face hammers
- Thermocouples
- Go/no-go gauges
- Paint booths
- Brazing equipment
- Twist drills
- Digital height gauges
- Dial calipers
- Strain gauge balances
- Prick punches
- Soldering irons
- Combination wrenches
- Bleeder wrenches
- Taper taps
- Air-supplying respirators
- Planer gauges
- Allen wrenches
- Coordinate measuring machines CMM
- Layout compasses
- Forklifts
- Telescopes
- Computerized numerical control CNC lathes
- Depth micrometers
- Dye penetrant inspection equipment
- Small hole gauges
- Adjustable wrenches
- Accelerometer sensors
- Scaffolding
- Welding torches
- Hacksaws
- Depth gauges
- Accelerometers
- Mallets
- Overhead cranes
- Center punches
- Vibration transducers
- Alignment squares
- Reed and Prince screwdrivers
- Plug taps
- Thickness gauges
- Safety lanyards
- Hand snips
- Straight chisels
- Plug gauges
- Aviation snips
- Digital torque wrenches
- Air drills
- X ray inspection equipment
- Data acquisition software
- Computerized numerical control CNC software
- Vibration analysis software
- Microsoft Office
- Inventory software
- Microsoft SQL Server
- Computer aided design CAD software
- Microsoft PowerPoint
- Oracle Java
- Structured query language SQL
- Microsoft Excel
- Microsoft Visio
- Extensible markup language XML
- Microsoft Word
- UNIX