Will “Flight Readiness Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Flight Readiness Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Flight Readiness Technician”
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Exchange cooling system components in various vehicles.
- Finish vehicle instrumentation and deinstrumentation.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Adjust, repair or replace faulty components of test setups and equipment.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
Related Technology & Tools
- Small hole gauges
- Coordinate measuring machines CMM
- Pressure gauges
- Planer gauges
- Digital force gauges
- Twist drills
- Adjustable wrenches
- Gamma ray testing equipment
- Pin punches
- Flat head screwdrivers
- Air-supplying respirators
- Annealing ovens
- Center punches
- Computer numerical controlled CNC milling machines
- Ball peen hammers
- Voltmeters
- Hand snips
- Soft face hammers
- Power screwdrivers
- Protractors
- Split dies
- Mass spectrometers
- Round files
- Gauge blocks
- Vertical turret lathes VTL
- Gantry mills
- Mallets
- Bore gauges
- Ultrasonic inspection equipment
- Riveting tools
- Telescopes
- Vibration transducers
- Bleeder wrenches
- Shielded arc welding tools
- Overhead cranes
- Vibration tables
- Thermocouples
- Accelerometers
- Borescopes
- Aviation snips
- Personal computers
- Scribers
- Taper taps
- Hook spanner wrenches
- Shakers
- Impact hammers
- Bottoming taps
- Digital height gauges
- Thickness gauges
- Shot peening equipment
- Half-round files
- Thread gauges
- Wire crimpers
- Micrometers
- Flow meters
- Dye penetrant inspection equipment
- Safety lanyards
- Safety wire pliers
- Welding torches
- Soldering irons
- Vixen files
- Hydrasets
- Brazing equipment
- Offset screwdrivers
- Flat files
- Magnetic particle inspection equipment
- Tri-squares
- Depth gauges
- Bench vises
- Infrared inspection equipment
- Vernier calipers
- Torx drivers
- Fire extinguishers
- Precision files
- Layout compasses
- Alignment squares
- Digital calipers
- Steel rules
- Electronic torque testers
- Plug taps
- Purifying respirators
- Hacksaws
- Air drills
- Knife files
- Mill files
- Bubble emission inspection equipment
- Aligning punches
- Paint booths
- Terminal computers
- Forklifts
- Straight chisels
- Snap gauges
- Straightedges
- Open end wrenches
- Countersinks
- Spring calipers
- Depth micrometers
- Body harnesses
- Gyroscopes
- Digital torque wrenches
- Vibration testers
- Torque wrenches
- Combination wrenches
- Scaffolding
- Socket wrenches
- Gas arc welding equipment
- Drill presses
- Dial calipers
- Skin mills
- X ray inspection equipment
- Telescoping gauges
- Pyrotechnic initiators
- Dividers
- Strain gauge balances
- Force transducers
- Allen wrenches
- Brazing hearths
- Theodolites
- V blocks
- Computerized numerical control CNC lathes
- Fluorescent penetrant inspection equipment
- Plug gauges
- Multi-axis mills
- Reed and Prince screwdrivers
- Prick punches
- Accelerometer sensors
- Eddy current inspection equipment
- Box end wrenches
- Safety goggles
- Drive punches
- Go/no-go gauges
- Lasers
- Computer aided design CAD software
- UNIX
- Vibration analysis software
- Microsoft Excel
- Microsoft Office
- Inventory software
- Data acquisition software
- Microsoft Word
- Microsoft PowerPoint
- Microsoft Visio
- Oracle Java
- Extensible markup language XML
- Computerized numerical control CNC software
- Structured query language SQL
- Microsoft SQL Server