Will “Communication Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Communication Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Communication Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Communication Technician”
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Adjust, repair or replace faulty components of test setups and equipment.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Exchange cooling system components in various vehicles.
- Finish vehicle instrumentation and deinstrumentation.
Related Technology & Tools
- Plug taps
- Safety goggles
- Force transducers
- Paint booths
- Micrometers
- Straight chisels
- Dividers
- Shakers
- Safety lanyards
- Offset screwdrivers
- Open end wrenches
- Electronic torque testers
- Planer gauges
- Socket wrenches
- Vibration testers
- Aviation snips
- Brazing equipment
- Thermocouples
- Plug gauges
- Straightedges
- Coordinate measuring machines CMM
- Torx drivers
- Fire extinguishers
- Gantry mills
- Safety wire pliers
- Overhead cranes
- Digital torque wrenches
- Thickness gauges
- Accelerometers
- Flat files
- Bench vises
- Dial calipers
- Alignment squares
- Steel rules
- Scribers
- Vibration transducers
- Terminal computers
- Ball peen hammers
- Brazing hearths
- Vernier calipers
- Magnetic particle inspection equipment
- Bleeder wrenches
- Tri-squares
- Purifying respirators
- Reed and Prince screwdrivers
- Allen wrenches
- Half-round files
- Adjustable wrenches
- Voltmeters
- Aligning punches
- Hand snips
- Skin mills
- Hacksaws
- Gauge blocks
- Impact hammers
- Power screwdrivers
- Computer numerical controlled CNC milling machines
- Telescoping gauges
- Bubble emission inspection equipment
- Hook spanner wrenches
- Split dies
- Thread gauges
- Vertical turret lathes VTL
- Knife files
- Taper taps
- Dye penetrant inspection equipment
- Vibration tables
- Mass spectrometers
- Soft face hammers
- Computerized numerical control CNC lathes
- Air drills
- Depth gauges
- Small hole gauges
- Drive punches
- Body harnesses
- Multi-axis mills
- Countersinks
- Round files
- Layout compasses
- Torque wrenches
- Digital force gauges
- Eddy current inspection equipment
- Hydrasets
- V blocks
- Lasers
- Digital height gauges
- Riveting tools
- Annealing ovens
- Drill presses
- Go/no-go gauges
- Flow meters
- Air-supplying respirators
- Depth micrometers
- Wire crimpers
- Personal computers
- Bore gauges
- Borescopes
- Accelerometer sensors
- Center punches
- Gas arc welding equipment
- Twist drills
- Vixen files
- Shot peening equipment
- X ray inspection equipment
- Forklifts
- Gyroscopes
- Gamma ray testing equipment
- Spring calipers
- Soldering irons
- Infrared inspection equipment
- Flat head screwdrivers
- Mill files
- Combination wrenches
- Fluorescent penetrant inspection equipment
- Pressure gauges
- Mallets
- Welding torches
- Precision files
- Snap gauges
- Digital calipers
- Protractors
- Prick punches
- Telescopes
- Pyrotechnic initiators
- Shielded arc welding tools
- Box end wrenches
- Strain gauge balances
- Pin punches
- Bottoming taps
- Theodolites
- Ultrasonic inspection equipment
- Scaffolding
- Oracle Java
- Microsoft PowerPoint
- Computerized numerical control CNC software
- Microsoft SQL Server
- Structured query language SQL
- Data acquisition software
- Microsoft Word
- Inventory software
- Microsoft Office
- UNIX
- Computer aided design CAD software
- Microsoft Excel
- Microsoft Visio
- Extensible markup language XML
- Vibration analysis software