Will “Communication Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Communication Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Communication Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Exchange cooling system components in various vehicles.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Finish vehicle instrumentation and deinstrumentation.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
Related Technology & Tools
- Vibration tables
- Thickness gauges
- Torx drivers
- Body harnesses
- Personal computers
- Layout compasses
- Impact hammers
- Telescoping gauges
- Combination wrenches
- Terminal computers
- Power screwdrivers
- Drive punches
- Round files
- Small hole gauges
- Vernier calipers
- Paint booths
- X ray inspection equipment
- Multi-axis mills
- Ultrasonic inspection equipment
- Knife files
- Bottoming taps
- Shakers
- Strain gauge balances
- Mass spectrometers
- Theodolites
- Air drills
- Safety goggles
- Countersinks
- Coordinate measuring machines CMM
- Electronic torque testers
- Straight chisels
- Pressure gauges
- Mallets
- Split dies
- Vertical turret lathes VTL
- Depth micrometers
- Hacksaws
- Prick punches
- Voltmeters
- Brazing hearths
- Plug gauges
- Computerized numerical control CNC lathes
- Safety wire pliers
- Precision files
- Infrared inspection equipment
- Reed and Prince screwdrivers
- Digital force gauges
- V blocks
- Allen wrenches
- Computer numerical controlled CNC milling machines
- Bench vises
- Annealing ovens
- Center punches
- Shielded arc welding tools
- Lasers
- Offset screwdrivers
- Fluorescent penetrant inspection equipment
- Hand snips
- Open end wrenches
- Flat files
- Hook spanner wrenches
- Tri-squares
- Protractors
- Accelerometer sensors
- Pyrotechnic initiators
- Force transducers
- Gyroscopes
- Socket wrenches
- Forklifts
- Bubble emission inspection equipment
- Thread gauges
- Gauge blocks
- Thermocouples
- Spring calipers
- Gamma ray testing equipment
- Twist drills
- Overhead cranes
- Hydrasets
- Shot peening equipment
- Plug taps
- Vibration testers
- Taper taps
- Dial calipers
- Air-supplying respirators
- Gantry mills
- Riveting tools
- Vixen files
- Telescopes
- Digital torque wrenches
- Skin mills
- Purifying respirators
- Wire crimpers
- Aviation snips
- Ball peen hammers
- Planer gauges
- Brazing equipment
- Vibration transducers
- Half-round files
- Snap gauges
- Digital height gauges
- Gas arc welding equipment
- Soldering irons
- Mill files
- Adjustable wrenches
- Magnetic particle inspection equipment
- Fire extinguishers
- Dye penetrant inspection equipment
- Straightedges
- Drill presses
- Soft face hammers
- Aligning punches
- Alignment squares
- Digital calipers
- Welding torches
- Flat head screwdrivers
- Micrometers
- Dividers
- Scaffolding
- Scribers
- Flow meters
- Torque wrenches
- Accelerometers
- Box end wrenches
- Safety lanyards
- Eddy current inspection equipment
- Bore gauges
- Pin punches
- Borescopes
- Go/no-go gauges
- Depth gauges
- Steel rules
- Bleeder wrenches
- Microsoft Office
- Inventory software
- Computerized numerical control CNC software
- Vibration analysis software
- Extensible markup language XML
- Microsoft Excel
- Microsoft Word
- UNIX
- Data acquisition software
- Structured query language SQL
- Oracle Java
- Microsoft SQL Server
- Computer aided design CAD software
- Microsoft PowerPoint
- Microsoft Visio