Will “Systems Test Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Systems Test Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Systems Test Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Adjust, repair or replace faulty components of test setups and equipment.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Finish vehicle instrumentation and deinstrumentation.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
Related Technology & Tools
- Riveting tools
- Gantry mills
- Planer gauges
- Knife files
- Lasers
- Pin punches
- Thickness gauges
- Flat files
- Personal computers
- Digital force gauges
- Computerized numerical control CNC lathes
- Hacksaws
- Vibration tables
- Offset screwdrivers
- Fire extinguishers
- Dial calipers
- Depth gauges
- Half-round files
- Pressure gauges
- Thermocouples
- Annealing ovens
- Multi-axis mills
- Aviation snips
- Bleeder wrenches
- Safety wire pliers
- Steel rules
- Go/no-go gauges
- Vernier calipers
- Safety goggles
- Box end wrenches
- Air drills
- Ultrasonic inspection equipment
- Skin mills
- Combination wrenches
- Digital calipers
- Digital torque wrenches
- Strain gauge balances
- Dye penetrant inspection equipment
- Force transducers
- Small hole gauges
- Forklifts
- Mill files
- Infrared inspection equipment
- Round files
- Bubble emission inspection equipment
- Plug gauges
- Telescoping gauges
- Hand snips
- Vertical turret lathes VTL
- Welding torches
- Pyrotechnic initiators
- Telescopes
- Twist drills
- Fluorescent penetrant inspection equipment
- Allen wrenches
- Overhead cranes
- Shot peening equipment
- Digital height gauges
- Magnetic particle inspection equipment
- Electronic torque testers
- Straight chisels
- Gas arc welding equipment
- Impact hammers
- Paint booths
- Power screwdrivers
- Precision files
- Bottoming taps
- Flow meters
- Computer numerical controlled CNC milling machines
- Gyroscopes
- Protractors
- Snap gauges
- Coordinate measuring machines CMM
- Gauge blocks
- Aligning punches
- Prick punches
- Accelerometer sensors
- Shakers
- Drill presses
- Taper taps
- Gamma ray testing equipment
- Shielded arc welding tools
- Air-supplying respirators
- Adjustable wrenches
- Eddy current inspection equipment
- Safety lanyards
- Center punches
- Torque wrenches
- Terminal computers
- Bench vises
- Soldering irons
- Torx drivers
- Mass spectrometers
- Layout compasses
- Tri-squares
- Alignment squares
- Vibration transducers
- Theodolites
- Split dies
- Hook spanner wrenches
- Soft face hammers
- Bore gauges
- Socket wrenches
- Brazing hearths
- Voltmeters
- Scaffolding
- Dividers
- X ray inspection equipment
- Body harnesses
- Wire crimpers
- Vibration testers
- Plug taps
- Purifying respirators
- Micrometers
- Ball peen hammers
- Reed and Prince screwdrivers
- Vixen files
- Scribers
- Thread gauges
- Accelerometers
- Borescopes
- Flat head screwdrivers
- Drive punches
- Countersinks
- Straightedges
- Brazing equipment
- Open end wrenches
- Mallets
- V blocks
- Hydrasets
- Spring calipers
- Depth micrometers
- Microsoft SQL Server
- Oracle Java
- Microsoft PowerPoint
- Inventory software
- Structured query language SQL
- Vibration analysis software
- UNIX
- Microsoft Word
- Data acquisition software
- Microsoft Excel
- Computerized numerical control CNC software
- Microsoft Visio
- Microsoft Office
- Extensible markup language XML
- Computer aided design CAD software