Will “Instrumentation Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Instrumentation Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Instrumentation Technician”
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Adjust, repair or replace faulty components of test setups and equipment.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Finish vehicle instrumentation and deinstrumentation.
Related Technology & Tools
- Precision files
- Coordinate measuring machines CMM
- Split dies
- Dividers
- Gantry mills
- Strain gauge balances
- Ultrasonic inspection equipment
- Voltmeters
- Digital force gauges
- Vixen files
- Flat files
- Skin mills
- Digital torque wrenches
- Digital height gauges
- Shakers
- Knife files
- Round files
- Aviation snips
- Alignment squares
- Vibration transducers
- Fluorescent penetrant inspection equipment
- Prick punches
- Vernier calipers
- Box end wrenches
- Depth gauges
- Drive punches
- Pyrotechnic initiators
- Forklifts
- Snap gauges
- Electronic torque testers
- Hand snips
- Riveting tools
- Center punches
- X ray inspection equipment
- Power screwdrivers
- Gas arc welding equipment
- Hacksaws
- Hydrasets
- Accelerometers
- Theodolites
- Body harnesses
- Wire crimpers
- Computerized numerical control CNC lathes
- Telescopes
- Flow meters
- Paint booths
- Thread gauges
- Magnetic particle inspection equipment
- Gyroscopes
- Plug gauges
- Steel rules
- Overhead cranes
- Air drills
- Plug taps
- Bottoming taps
- Dye penetrant inspection equipment
- Safety lanyards
- Scribers
- Straight chisels
- Safety goggles
- Allen wrenches
- Welding torches
- Digital calipers
- Dial calipers
- Mass spectrometers
- Multi-axis mills
- Bubble emission inspection equipment
- V blocks
- Soldering irons
- Depth micrometers
- Thermocouples
- Pressure gauges
- Hook spanner wrenches
- Vibration tables
- Bleeder wrenches
- Gauge blocks
- Mallets
- Open end wrenches
- Air-supplying respirators
- Twist drills
- Drill presses
- Torx drivers
- Fire extinguishers
- Offset screwdrivers
- Bore gauges
- Impact hammers
- Purifying respirators
- Protractors
- Taper taps
- Tri-squares
- Adjustable wrenches
- Soft face hammers
- Straightedges
- Eddy current inspection equipment
- Computer numerical controlled CNC milling machines
- Countersinks
- Planer gauges
- Borescopes
- Gamma ray testing equipment
- Thickness gauges
- Half-round files
- Layout compasses
- Brazing hearths
- Shielded arc welding tools
- Aligning punches
- Personal computers
- Lasers
- Shot peening equipment
- Brazing equipment
- Socket wrenches
- Vibration testers
- Terminal computers
- Micrometers
- Combination wrenches
- Accelerometer sensors
- Bench vises
- Telescoping gauges
- Safety wire pliers
- Go/no-go gauges
- Reed and Prince screwdrivers
- Vertical turret lathes VTL
- Flat head screwdrivers
- Annealing ovens
- Torque wrenches
- Ball peen hammers
- Pin punches
- Mill files
- Spring calipers
- Infrared inspection equipment
- Scaffolding
- Force transducers
- Small hole gauges
- Microsoft Visio
- Data acquisition software
- Oracle Java
- UNIX
- Microsoft Office
- Microsoft Excel
- Computerized numerical control CNC software
- Microsoft SQL Server
- Microsoft Word
- Microsoft PowerPoint
- Vibration analysis software
- Extensible markup language XML
- Structured query language SQL
- Computer aided design CAD software
- Inventory software