Will “Calibration Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Calibration Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Calibration Technician”
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Exchange cooling system components in various vehicles.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
Related Technology & Tools
- Vibration tables
- Offset screwdrivers
- Electronic torque testers
- Round files
- Power screwdrivers
- Voltmeters
- Hydrasets
- Force transducers
- Personal computers
- Mallets
- Mass spectrometers
- Small hole gauges
- Micrometers
- Air drills
- Skin mills
- Gamma ray testing equipment
- Lasers
- Safety wire pliers
- Dividers
- Wire crimpers
- Bubble emission inspection equipment
- Scaffolding
- Pin punches
- Twist drills
- Welding torches
- Adjustable wrenches
- Tri-squares
- Reed and Prince screwdrivers
- Theodolites
- Plug gauges
- Ball peen hammers
- Accelerometers
- Straight chisels
- Torque wrenches
- Snap gauges
- Protractors
- Eddy current inspection equipment
- Safety lanyards
- Fluorescent penetrant inspection equipment
- Knife files
- Mill files
- Shakers
- Soldering irons
- Borescopes
- Flat files
- Pyrotechnic initiators
- Gauge blocks
- Thermocouples
- Aligning punches
- Accelerometer sensors
- Vibration transducers
- Depth gauges
- Telescopes
- Aviation snips
- Coordinate measuring machines CMM
- Scribers
- Split dies
- Spring calipers
- Computerized numerical control CNC lathes
- Body harnesses
- Taper taps
- Steel rules
- Hacksaws
- Combination wrenches
- Pressure gauges
- Bleeder wrenches
- Overhead cranes
- Multi-axis mills
- Bottoming taps
- Center punches
- Ultrasonic inspection equipment
- Socket wrenches
- Thread gauges
- Allen wrenches
- Annealing ovens
- Air-supplying respirators
- Torx drivers
- Planer gauges
- Thickness gauges
- Digital calipers
- Dial calipers
- Alignment squares
- Vertical turret lathes VTL
- Plug taps
- V blocks
- Bore gauges
- Hand snips
- Digital torque wrenches
- Magnetic particle inspection equipment
- Safety goggles
- Computer numerical controlled CNC milling machines
- Dye penetrant inspection equipment
- Impact hammers
- Prick punches
- Gas arc welding equipment
- Strain gauge balances
- Gantry mills
- Vibration testers
- Paint booths
- Shielded arc welding tools
- Open end wrenches
- Brazing equipment
- Riveting tools
- Straightedges
- Telescoping gauges
- Bench vises
- Brazing hearths
- Go/no-go gauges
- Soft face hammers
- Layout compasses
- Digital height gauges
- Depth micrometers
- Purifying respirators
- Forklifts
- Shot peening equipment
- Flat head screwdrivers
- Terminal computers
- Flow meters
- X ray inspection equipment
- Drill presses
- Vernier calipers
- Precision files
- Gyroscopes
- Box end wrenches
- Vixen files
- Half-round files
- Hook spanner wrenches
- Digital force gauges
- Infrared inspection equipment
- Fire extinguishers
- Countersinks
- Drive punches
- Computer aided design CAD software
- Microsoft Excel
- Microsoft Visio
- Computerized numerical control CNC software
- Microsoft Word
- UNIX
- Inventory software
- Structured query language SQL
- Data acquisition software
- Oracle Java
- Extensible markup language XML
- Microsoft PowerPoint
- Microsoft SQL Server
- Vibration analysis software
- Microsoft Office