Will “Electronics Technician” be Replaced By Robots? 🤔
48% Chance of Automation
“Electronics Technician” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Electronics Technician”
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Finish vehicle instrumentation and deinstrumentation.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Adjust, repair or replace faulty components of test setups and equipment.
Related Technology & Tools
- Coordinate measuring machines CMM
- Half-round files
- Eddy current inspection equipment
- Computerized numerical control CNC lathes
- Mill files
- Split dies
- Thread gauges
- Brazing equipment
- X ray inspection equipment
- Go/no-go gauges
- Annealing ovens
- Plug gauges
- Riveting tools
- Straight chisels
- Vertical turret lathes VTL
- Digital force gauges
- Strain gauge balances
- Tri-squares
- Digital calipers
- Bottoming taps
- Gantry mills
- Wire crimpers
- Fluorescent penetrant inspection equipment
- Steel rules
- Open end wrenches
- Center punches
- Box end wrenches
- Pressure gauges
- Bleeder wrenches
- Drive punches
- Depth micrometers
- Lasers
- Bore gauges
- V blocks
- Protractors
- Shot peening equipment
- Mallets
- Infrared inspection equipment
- Safety wire pliers
- Soft face hammers
- Dividers
- Ultrasonic inspection equipment
- Welding torches
- Hook spanner wrenches
- Personal computers
- Vibration testers
- Accelerometers
- Vibration tables
- Torque wrenches
- Skin mills
- Forklifts
- Computer numerical controlled CNC milling machines
- Hand snips
- Reed and Prince screwdrivers
- Hacksaws
- Flat head screwdrivers
- Bubble emission inspection equipment
- Accelerometer sensors
- Vernier calipers
- Snap gauges
- Straightedges
- Purifying respirators
- Depth gauges
- Pin punches
- Gas arc welding equipment
- Body harnesses
- Magnetic particle inspection equipment
- Air-supplying respirators
- Pyrotechnic initiators
- Prick punches
- Safety goggles
- Precision files
- Alignment squares
- Air drills
- Electronic torque testers
- Force transducers
- Planer gauges
- Scaffolding
- Shakers
- Adjustable wrenches
- Vibration transducers
- Flow meters
- Borescopes
- Bench vises
- Small hole gauges
- Multi-axis mills
- Telescoping gauges
- Impact hammers
- Drill presses
- Offset screwdrivers
- Mass spectrometers
- Micrometers
- Gyroscopes
- Plug taps
- Taper taps
- Dial calipers
- Combination wrenches
- Aligning punches
- Layout compasses
- Digital height gauges
- Gamma ray testing equipment
- Thickness gauges
- Theodolites
- Ball peen hammers
- Round files
- Fire extinguishers
- Digital torque wrenches
- Vixen files
- Safety lanyards
- Countersinks
- Power screwdrivers
- Thermocouples
- Scribers
- Soldering irons
- Flat files
- Voltmeters
- Terminal computers
- Knife files
- Dye penetrant inspection equipment
- Socket wrenches
- Shielded arc welding tools
- Brazing hearths
- Aviation snips
- Allen wrenches
- Paint booths
- Hydrasets
- Overhead cranes
- Gauge blocks
- Twist drills
- Spring calipers
- Telescopes
- Torx drivers
- Vibration analysis software
- Microsoft PowerPoint
- Oracle Java
- Data acquisition software
- UNIX
- Microsoft Visio
- Microsoft Word
- Extensible markup language XML
- Microsoft Excel
- Microsoft Office
- Structured query language SQL
- Computer aided design CAD software
- Inventory software
- Microsoft SQL Server
- Computerized numerical control CNC software