Will “Spacecraft Systems Engineer” be Replaced By Robots? 🤔
48% Chance of Automation
“Spacecraft Systems Engineer” will probably not be replaced by robots.
This job is ranked #290 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate, install, calibrate, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Job Details
- The SOC (Standard Occupational Classification) code is 17-3021.00
- The Mean Annual Wage in the U.S. is $ 71,070.00
- The Mean Hourly Wage is $ 34.00
- Currently, there are 11,970 people on this job
☝️ Information based on the reference occupation “Aerospace Engineering and Operations Technicians”.
Also Known As…
- Aerospace Engineering and Operations Technicians
- Test Technician
- Systems Test Technician
- Spacecraft Systems Engineer
- Instrumentation Technician
- Engineering Technician
- Electronics Technician
- Communication Technician
- Calibration Technician
- Avionics Test Technician
- Avionics Technician
- Wind Tunnel Technician
- Wind Tunnel Mechanic
- Test Specialist
- Test Equipment Mechanic
- Research Mechanic
- Radar Technician
- Project Engineer
- Flight Test Data Acquisition Technician
- Flight Technician
- Flight Readiness Technician
- Flight Data Technician
- Field Service Engineer
- Engineering Test Specialist
- Engineering Specialist Technician
- Engineering Operations Leader
- Data Acquisition Technician
- Certified Technician Specialist
- Altitude Chamber Technician
- Aerospace Technician
- Aerospace Physiological Technician
- Aerospace Mechanic
- Aerographer
Tasks for “Spacecraft Systems Engineer”
- Operate and calibrate computer systems and devices to comply with test requirements and to perform data acquisition and analysis.
- Record and interpret test data on parts, assemblies, and mechanisms.
- Test aircraft systems under simulated operational conditions, performing systems readiness tests and pre- and post-operational checkouts, to establish design or fabrication parameters.
- Finish vehicle instrumentation and deinstrumentation.
- Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
- Inspect, diagnose, maintain, and operate test setups and equipment to detect malfunctions.
- Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications.
- Exchange cooling system components in various vehicles.
- Confer with engineering personnel regarding details and implications of test procedures and results.
- Adjust, repair or replace faulty components of test setups and equipment.
- Construct and maintain test facilities for aircraft parts and systems, according to specifications.
Related Technology & Tools
- Wire crimpers
- Pressure gauges
- Torx drivers
- Hacksaws
- Plug taps
- Vibration tables
- Reed and Prince screwdrivers
- Socket wrenches
- Box end wrenches
- Power screwdrivers
- Safety goggles
- Electronic torque testers
- Ball peen hammers
- Gas arc welding equipment
- Straight chisels
- Flat files
- Offset screwdrivers
- Paint booths
- Thickness gauges
- Depth micrometers
- Bore gauges
- Bleeder wrenches
- Straightedges
- Layout compasses
- Vernier calipers
- Fire extinguishers
- Aligning punches
- Brazing equipment
- Gantry mills
- Soldering irons
- Air-supplying respirators
- Force transducers
- Safety wire pliers
- Multi-axis mills
- Terminal computers
- Drill presses
- Knife files
- Drive punches
- Overhead cranes
- Fluorescent penetrant inspection equipment
- Purifying respirators
- Plug gauges
- Pin punches
- Dividers
- Safety lanyards
- Bubble emission inspection equipment
- Bottoming taps
- Flow meters
- Adjustable wrenches
- Mass spectrometers
- Ultrasonic inspection equipment
- Voltmeters
- Tri-squares
- Digital torque wrenches
- Scaffolding
- Vertical turret lathes VTL
- Soft face hammers
- Gauge blocks
- Body harnesses
- Lasers
- V blocks
- Digital height gauges
- Countersinks
- Air drills
- Taper taps
- Shielded arc welding tools
- Digital calipers
- Split dies
- Telescopes
- Strain gauge balances
- Open end wrenches
- Alignment squares
- Half-round files
- Thread gauges
- Impact hammers
- Accelerometers
- Magnetic particle inspection equipment
- Hydrasets
- Welding torches
- Depth gauges
- Eddy current inspection equipment
- Combination wrenches
- Go/no-go gauges
- Allen wrenches
- Flat head screwdrivers
- Vibration testers
- Brazing hearths
- Annealing ovens
- Computer numerical controlled CNC milling machines
- Planer gauges
- Spring calipers
- Riveting tools
- Aviation snips
- Vibration transducers
- Mallets
- Personal computers
- Gyroscopes
- Theodolites
- Center punches
- Pyrotechnic initiators
- Hook spanner wrenches
- Borescopes
- X ray inspection equipment
- Vixen files
- Infrared inspection equipment
- Skin mills
- Dye penetrant inspection equipment
- Digital force gauges
- Computerized numerical control CNC lathes
- Gamma ray testing equipment
- Mill files
- Hand snips
- Accelerometer sensors
- Twist drills
- Torque wrenches
- Prick punches
- Thermocouples
- Scribers
- Dial calipers
- Round files
- Snap gauges
- Bench vises
- Coordinate measuring machines CMM
- Micrometers
- Protractors
- Shakers
- Shot peening equipment
- Telescoping gauges
- Precision files
- Steel rules
- Small hole gauges
- Forklifts
- Microsoft Excel
- Data acquisition software
- Microsoft Word
- Microsoft Visio
- Computer aided design CAD software
- Microsoft Office
- Microsoft SQL Server
- Oracle Java
- Structured query language SQL
- Computerized numerical control CNC software
- Microsoft PowerPoint
- Extensible markup language XML
- UNIX
- Inventory software
- Vibration analysis software